Flags in an RTL Expression
==========================

   RTL expressions contain several flags (one-bit bitfields) that are
used in certain types of expression.  Most often they are accessed with
the following macros:

`MEM_VOLATILE_P (X)'
     In `mem' expressions, nonzero for volatile memory references.
     Stored in the `volatil' field and printed as `/v'.

`MEM_IN_STRUCT_P (X)'
     In `mem' expressions, nonzero for reference to an entire
     structure, union or array, or to a component of one.  Zero for
     references to a scalar variable or through a pointer to a scalar.
     Stored in the `in_struct' field and printed as `/s'.

`REG_LOOP_TEST_P'
     In `reg' expressions, nonzero if this register's entire life is
     contained in the exit test code for some loop.  Stored in the
     `in_struct' field and printed as `/s'.

`REG_USERVAR_P (X)'
     In a `reg', nonzero if it corresponds to a variable present in the
     user's source code.  Zero for temporaries generated internally by
     the compiler.  Stored in the `volatil' field and printed as `/v'.

`REG_FUNCTION_VALUE_P (X)'
     Nonzero in a `reg' if it is the place in which this function's
     value is going to be returned.  (This happens only in a hard
     register.)  Stored in the `integrated' field and printed as `/i'.

     The same hard register may be used also for collecting the values
     of functions called by this one, but `REG_FUNCTION_VALUE_P' is zero
     in this kind of use.

`SUBREG_PROMOTED_VAR_P'
     Nonzero in a `subreg' if it was made when accessing an object that
     was promoted to a wider mode in accord with the `PROMOTED_MODE'
     machine description macro (see Storage Layout.).  In this
     case, the mode of the `subreg' is the declared mode of the object
     and the mode of `SUBREG_REG' is the mode of the register that
     holds the object.  Promoted variables are always either sign- or
     zero-extended to the wider mode on every assignment.  Stored in
     the `in_struct' field and printed as `/s'.

`SUBREG_PROMOTED_UNSIGNED_P'
     Nonzero in a `subreg' that has `SUBREG_PROMOTED_VAR_P' nonzero if
     the object being referenced is kept zero-extended and zero if it
     is kept sign-extended.  Stored in the `unchanging' field and
     printed as `/u'.

`RTX_UNCHANGING_P (X)'
     Nonzero in a `reg' or `mem' if the value is not changed.  (This
     flag is not set for memory references via pointers to constants.
     Such pointers only guarantee that the object will not be changed
     explicitly by the current function.  The object might be changed by
     other functions or by aliasing.)  Stored in the `unchanging' field
     and printed as `/u'.

`RTX_INTEGRATED_P (INSN)'
     Nonzero in an insn if it resulted from an in-line function call.
     Stored in the `integrated' field and printed as `/i'.  This may be
     deleted; nothing currently depends on it.

`SYMBOL_REF_USED (X)'
     In a `symbol_ref', indicates that X has been used.  This is
     normally only used to ensure that X is only declared external
     once.  Stored in the `used' field.

`SYMBOL_REF_FLAG (X)'
     In a `symbol_ref', this is used as a flag for machine-specific
     purposes.  Stored in the `volatil' field and printed as `/v'.

`LABEL_OUTSIDE_LOOP_P'
     In `label_ref' expressions, nonzero if this is a reference to a
     label that is outside the innermost loop containing the reference
     to the label.  Stored in the `in_struct' field and printed as `/s'.

`INSN_DELETED_P (INSN)'
     In an insn, nonzero if the insn has been deleted.  Stored in the
     `volatil' field and printed as `/v'.

`INSN_ANNULLED_BRANCH_P (INSN)'
     In an `insn' in the delay slot of a branch insn, indicates that an
     annulling branch should be used.  See the discussion under
     `sequence' below.  Stored in the `unchanging' field and printed as
     `/u'.

`INSN_FROM_TARGET_P (INSN)'
     In an `insn' in a delay slot of a branch, indicates that the insn
     is from the target of the branch.  If the branch insn has
     `INSN_ANNULLED_BRANCH_P' set, this insn should only be executed if
     the branch is taken.  For annulled branches with this bit clear,
     the insn should be executed only if the branch is not taken.
     Stored in the `in_struct' field and printed as `/s'.

`CONSTANT_POOL_ADDRESS_P (X)'
     Nonzero in a `symbol_ref' if it refers to part of the current
     function's "constants pool".  These are addresses close to the
     beginning of the function, and GNU CC assumes they can be addressed
     directly (perhaps with the help of base registers).  Stored in the
     `unchanging' field and printed as `/u'.

`CONST_CALL_P (X)'
     In a `call_insn', indicates that the insn represents a call to a
     const function.  Stored in the `unchanging' field and printed as
     `/u'.

`LABEL_PRESERVE_P (X)'
     In a `code_label', indicates that the label can never be deleted.
     Labels referenced by a non-local goto will have this bit set.
     Stored in the `in_struct' field and printed as `/s'.

`SCHED_GROUP_P (INSN)'
     During instruction scheduling, in an insn, indicates that the
     previous insn must be scheduled together with this insn.  This is
     used to ensure that certain groups of instructions will not be
     split up by the instruction scheduling pass, for example, `use'
     insns before a `call_insn' may not be separated from the
     `call_insn'.  Stored in the `in_struct' field and printed as `/s'.

   These are the fields which the above macros refer to:

`used'
     Normally, this flag is used only momentarily, at the end of RTL
     generation for a function, to count the number of times an
     expression appears in insns.  Expressions that appear more than
     once are copied, according to the rules for shared structure
     (see Sharing.).

     In a `symbol_ref', it indicates that an external declaration for
     the symbol has already been written.

     In a `reg', it is used by the leaf register renumbering code to
     ensure that each register is only renumbered once.

`volatil'
     This flag is used in `mem', `symbol_ref' and `reg' expressions and
     in insns.  In RTL dump files, it is printed as `/v'.

     In a `mem' expression, it is 1 if the memory reference is volatile.
     Volatile memory references may not be deleted, reordered or
     combined.

     In a `symbol_ref' expression, it is used for machine-specific
     purposes.

     In a `reg' expression, it is 1 if the value is a user-level
     variable.  0 indicates an internal compiler temporary.

     In an insn, 1 means the insn has been deleted.

`in_struct'
     In `mem' expressions, it is 1 if the memory datum referred to is
     all or part of a structure or array; 0 if it is (or might be) a
     scalar variable.  A reference through a C pointer has 0 because
     the pointer might point to a scalar variable.  This information
     allows the compiler to determine something about possible cases of
     aliasing.

     In an insn in the delay slot of a branch, 1 means that this insn
     is from the target of the branch.

     During instruction scheduling, in an insn, 1 means that this insn
     must be scheduled as part of a group together with the previous
     insn.

     In `reg' expressions, it is 1 if the register has its entire life
     contained within the test expression of some loop.

     In `subreg' expressions, 1 means that the `subreg' is accessing an
     object that has had its mode promoted from a wider mode.

     In `label_ref' expressions, 1 means that the referenced label is
     outside the innermost loop containing the insn in which the
     `label_ref' was found.

     In `code_label' expressions, it is 1 if the label may never be
     deleted.  This is used for labels which are the target of
     non-local gotos.

     In an RTL dump, this flag is represented as `/s'.

`unchanging'
     In `reg' and `mem' expressions, 1 means that the value of the
     expression never changes.

     In `subreg' expressions, it is 1 if the `subreg' references an
     unsigned object whose mode has been promoted to a wider mode.

     In an insn, 1 means that this is an annulling branch.

     In a `symbol_ref' expression, 1 means that this symbol addresses
     something in the per-function constants pool.

     In a `call_insn', 1 means that this instruction is a call to a
     const function.

     In an RTL dump, this flag is represented as `/u'.

`integrated'
     In some kinds of expressions, including insns, this flag means the
     rtl was produced by procedure integration.

     In a `reg' expression, this flag indicates the register containing
     the value to be returned by the current function.  On machines
     that pass parameters in registers, the same register number may be
     used for parameters as well, but this flag is not set on such uses.